Buying a used teardrop trailer is an excellent way to save money and avoid the huge decrease in value a new RV sees immediately after towing it off the lot.
Did you know…
A new travel trailer typically loses 40% of its value in the first five years!
While buying a used teardrop trailer has its perks, there are a few things you need to be mindful of so you don’t end up spending more money in the long run on repair costs.
So, here’s what to look for when buying a used teardrop trailer, along with some important tips and a downloadable checklist to ensure you don’t miss anything.
The first step is to get a clear understanding of the trailer’s history. Just because it looks clean and well-kept doesn’t mean it was properly maintained or didn’t encounter other issues.
Ask the dealer or owner, depending on whether you are buying the camper from a lot or a private party, for any information or records about the vehicle’s past.
Unfortunately, you can’t just run a Carfax report on towable trailers to get the history.
Teardrop Exterior Checklist
Now, let’s inspect the trailer itself, starting with the exterior of the recreational vehicle.
One of the most neglected inspection checkpoints is the roof, but it’s one of the most important!
Why? A leaking roof can cause all sorts of issues, including water damage, mold, rotting of the structure, etc. And when this happens inside the walls, it can be hard to catch in a timely manner, requiring expensive repairs.
Roof Inspection Checklist:
- Check the roof for cracks and damage, especially along seams.
- Inspect the caulking and other seals for drying out or cracking.
- Check around the AC unit (if applicable), vent covers, solar panels, roof racks, etc., for cracks in the seals or the units themselves.
- Remove any vent covers and check for blockages, for example, debris build-up, animal nests, etc.
- Lastly, spray it with a hose (ask the owner for permission first). Inspect any areas that pool water and inspect the camper’s interior for dripping.
Walk around the teardrop’s exterior and inspect for any damage, including tears, holes, cracks, delamination, etc.
Stand at one end of the trailer and peer down the side of it, looking for any malformation or bowing of the walls, which might signal a structural issue. Perform this step on the other side, ensuring the walls are level.
Windows and Doors
The windows and doors on a teardrop are another common entry point for moisture and are prone to other issues.
- Check around the windows and doors for any dried, cracking, or shrinking seals. Spray down the teardrop trailer’s exterior with a hose and inspect the windows and doors for leaks.
- Check the screens for any tears or rips.
- Make sure the windows and doors open and close properly.
- Inspect for any missing screws or components.
- Ensure both the windows and doors properly latch/lock.
If applicable, open the awnings and ensure they roll out smoothly. Inspect the awning material for any tears or rips.
Lastly, make sure the awning closes smoothly and securely locks in place.
If your trailer features slideouts or pop-ups, be sure to open them fully. Inspect the seals and any moving parts for damage or corrosion.
If allowed, another spray test with your hose or pressure sprayer while the slideout is extended will help identify any water leaks.
Close the slideout or pop-up and ensure it operates smoothly.
A PDI (pre-delivery inspection) is performed by the dealership before they sell an RV, which includes a propane system inspection. With a private party seller, you might not be afforded that luxury.
So, if you’re working with an RV dealer, ask for a signed PDI form. If you’re working with a private seller and they haven’t performed an inspection, ask that they have it done. Who pays for the inspection will just depend on how badly they want to sell it or how badly you want to buy it. You may even agree to split the cost.
Either way, we recommend a professional technician perform the propane system inspection.
Next, we want to check all the connections on the RV’s exterior, including the hitch, power connections, water tank hookups, and drains.
You may need to additionally inspect, if applicable:
- Lighting connectors
- Brake controllers
- Tire pressure monitoring system
Ensure they are all in good working order.
Finally, you’ll want to look under the trailer for any damage or wear and tear.
- Check the axles, suspension, and other components for rust and corrosion.
- Check the tires for proper pressure and the DOT code on the sidewall for the tire age to see if they need to be replaced. Unlike car tires, RV tires are often replaced due to age, as opposed to the amount of tread left (though it’s still a good idea to check the tread).
Teardrop Interior Checklist
Once you’ve completed the exterior checklist, it’s time to move inside the RV.
The electrical system often powers many essential components like your fridge, microwave, AC, lighting, entertainment devices, pumps, etc.
So, it’s important to ensure the system runs properly, on both shore and battery power.
- Start with the breaker box and make sure all of the switches are properly functioning and that none of them are tripped.
- Test all of the RV’s electrical appliances and ensure they are receiving power and operating properly.
- Test all of the lighting.
- Test all of the electrical outlets to ensure they are receiving power.
- Test any safety devices that may be hard-wired in.
- If the RV has a battery (or batteries), ensure they are corrosion-free, have the proper voltage (around 12.6 volts), and check their age.
Water Damage and Mold
Water damage is one of the most common types of damage in a teardrop trailer. And as we explained above, it can wreak havoc on your camper, leading to costly repairs.
Signs of water damage can include:
- Brown spots on the ceiling
- Bowed or bubbling ceiling
- Warped walls or floors
Windows and Doors
If you didn’t check the windows from the inside while running through the exterior checks above, now’s the time to ensure they open and close properly, the cranks work, and they are sealed when shut.
Heating and Cooling System
Your trailer’s heating and cooling systems help make it livable, especially in extreme temperatures. So, we want to make sure these are in good working order.
Checking the AC
Turn on the air conditioning unit and ensure cold air blows out of all the vents. Let it run for 20 to 30 minutes and listen for any weird noises or squeaks. Ensure the inside temperature of the RV is indeed cooling down.
Additionally, you’ll want to ensure:
- There are no leaks around the AC unit
- The filters are clean
- The fan mode works
Checking the RV Furnace
Turn on the furnace and ensure it fires up properly. Again, listen for any weird squeaking and ensure warm air comes from the vents.
The last thing you want is plumbing issues the first time you take your new RV out on the road! They aren’t fun to clean up, can be hard to diagnose, and can lead to water damage.
There are a few major components we’ll want to inspect, including:
- Tanks: Hook the trailer to city water and fill the fresh water tank. Ensure the tanks fill properly and aren’t leaking. Unhook from city water.
- Fixtures: Test all the fixtures in the trailer, including the faucets, shower, toilets, etc.
- Water pump: Ensure the pump works properly and all fixtures receive water.
- Water heater: Ensure that the water heater powers on and that hot water flows out of the faucets.
- Drains: Once all the above has been tested, ensure the tanks drain properly.
Test all kitchen appliances and ensure they are in good working condition. This will include testing the air temperature in the refrigerator and freezer, testing all of the burners on the stove and temperature in the oven, etc.
Remember, some appliances may use electricity and gas, so test them in both modes.
Check the operation of any TVs, satellite dishes, audio systems, wifi routers, etc., and any remotes that operate these components.
Test all the safety devices and alarms in the teardrop trailer, including gas, carbon monoxide, and smoke detectors.
Be sure there is at least one up-to-date and functioning fire extinguisher.
Lastly, visually inspect every little nook and cranny of the RV. Test storage cabinets, cupboards, and drawers, look for evidence of rodents, etc.
Buying a Used Teardrop Trailer Checklist
We put the above teardrop trailer inspection checklist into a downloadable PDF and shareable infographic!
Click here to download a pdf version of our buying a used teardrop trailer checklist.
Related: What to Look for When Buying a Used Travel Trailer (Checklist)
Buying a Used Teardrop Trailer FAQs
What Should I Ask When Buying a Used Teardrop Trailer?
A few important questions you should ask before buying a used teardrop trailer include:
- How many people previously owned the trailer?
- Do you have the title for the camper?
- Do you have the previous maintenance records?
- Has the teardrop trailer been in any major accidents?
- Where was the trailer stored when not in use?
- Is there any warranty left on the trailer?
- Can I extend the warranty?
- How much does the trailer weigh?
- How do I stabilize and level the trailer?
- Does it come with a spare tire?
Combining these questions with the trailer checklist above is an important step in getting the information you’ll need to make the right buying decision.
How Long Will a Teardrop Trailer Last?
A teardrop trailer can last anywhere from 10 – 30 years or longer, depending on how well it’s taken care of. You can extend a teardrop trailer’s life with proper storage, maintenance, and care.
Are Teardrop Trailers Worth It?
Buying a teardrop trailer is worth it if it meets your specific camping needs and budget. Teardrop trailers are much cheaper than motorized campers and many other towable RVs, are easy to tow, low-maintenance, and economical.